If you need metal jali, you will find two types of cutting methods available. Laser cutting and CNC cutting are both used by metal jali cutting services in Kolkata, West Bengal. Laser cutting uses a laser beam to cut the metal. CNC cutting uses plasma or mechanical tools. Both methods work, but they give you different results. This guide explains both so you can choose what works for your needs.
In laser cutting, a laser beam hits the metal and melts through it. A computer tells the laser where to go. In CNC cutting, a plasma torch or blade cuts the metal. A computer controls this too. The difference is in how they cut and what the finished product looks like.
Laser cutting gives you better details. The laser beam is very thin. It can cut small patterns and make smooth curves. CNC cutting tools are thicker. They cannot make the same fine details.
At Ganesh Steel Emporium, we use 3000W laser machines. We work mainly with mild steel. These machines can cut designs up to 150 mm thick. They can handle pieces up to 1300 mm x 900 mm. If you order several panels, they all look the same.
After laser cutting, the edges are smooth. You do not need much work to clean them before painting or installing. After CNC cutting, the edges are rough. You need to grind them smooth.
When you choose metal jali cutting services in Kolkata, West Bengal, this matters. Smooth edges look better. They are also safer to touch and easier to paint.
We mostly use mild steel. It is strong and does not cost too much. We also offer stainless steel, brass, copper, and aluminum.
If your jali will be outside, stainless steel is better. It does not rust. If your jali will be inside, mild steel works fine and costs less. Brass and copper look nice for decorative pieces.
Laser cutting is faster when your design has lots of details. It also wastes less metal because the cut is narrow. When you need many pieces that look exactly the same, laser cutting does this well.
For metal jali cutting services in Kolkata, West Bengal, this means your project gets done on time. The quality stays good from the first piece to the last piece.
Laser cutting is good for window jalis, decorative screens, wall panels, and room dividers. These need good details and smooth edges. CNC cutting is better for very thick metal in factories where details do not matter as much.
Most home and office jali work needs laser cutting. This is why metal jali cutting services in Kolkata, West Bengal use laser cutting for these projects.
Think about what you want. Do you need detailed patterns? Do you want smooth edges? Do you need several pieces that match exactly? If you answer yes to these, then laser cutting is what you need.
We have been doing this work since 2008. Most of the jali projects we see need laser cutting. It gives better results. We do projects for homes, offices, shops, and other buildings.
For homes, we make window screens, balcony screens, room dividers, and wall panels. For businesses, we make office partitions, reception backdrops, and shop facades. For outdoor areas, we make gates, fences, and balcony screens.
Each type of project needs something different. Window jalis need to let light and air through but also keep you safe. Room dividers need to separate rooms but let you see through a little. Wall panels are mostly for decoration.
When you look at different metal jali cutting services in Kolkata, West Bengal, ask them what method they use. Ask to see their previous work. This will show you the quality.
We can show you different designs. We do small projects and large projects. We bring your jali to you. You can pay with cash, card, or cheque.
Call us or come see us. We will show you samples. We will tell you how long it will take and what it will cost.
